Hemp Oil - Artisan Paint

This solvent-free organic oil finish provides a protective, water-resistant surface.  Use on timber that is raw, stained, porous paint finishes (such as chalk or milk paints) or to revive old wood finishes.  It penetrates the timber and protect from the inside out.  Once cured it does not leave a surface film that will chip or scratch.  This food-safe oil finish is perfect for use in the kitchen on wood or stone.  Used outside, it can restore the lustre of old oil based paint or revitalize surfaces such as cast iron.  Test on an inconspicuous spot prior to using on an entire piece.

How to use this product:
Surface must be clean and dry.  Apply small amount of oil to surface using a clean cloth.  Rub gently until it is absorbed into raw wood or porous paint finish.  For additional sheen and protection, add 2-4 coats.  With no solvents, drying time is extended, so allow 2 hours between coats and wipe away excess after 12 hours.  Finished piece may take several days to cure.  To maintain, apply a light coat every other year as needed.  To remove scratches, lightly sand blemish, then reapply oil.

250ml covers approximately 3-6 sq. metres  Soap and water cleanup

Made in Australia, organic, eco friendly