Algonquin - Fusion Mineral Paint
Our most popular deep taupe tends to change it tone depending on the lighting situation.
Is this neutral colour a yellow-beige or a brownish-grey, or a grey sage? It's really hard to say as it all depends on the colours around it. It can go with just about anything!
Fusion Mineral PaintTM is made with high quality ingredients, including a durable built-in top coat that cures to a washable matte sheen.
When you combine the very best paint, with the very best brushes, perfection comes easily!
Base : waterbased
Coverage : approx 75 sqft per 500 mL
Finish/sheen : matte
Clean up : water
Dry time : 30 min approx
Recoat time : 1-2 hours approx
Cure time : 21 days approx
**********************
How to clean surface:
Mild soap and water
Can be used over
Most wax-free surfaces; tricky surfaces with use of Ultra GripTM
Can be painted over:
After re-coat time
How to use:
Prep, Paint, Done!
APPLICATION TIPS
Less is more when it comes to how much paint to have on your tools.
Dip your brush into the paint a maximum of halfway up the bristles, remove excess paint so it is barely visible on the brush. Paint from one end to the other, avoid brushing back and forth too much as the paint will start to dry, as it dries your brush will create texture, aka brush marks on your surface.
Apply multiple thin coats to avoid brush strokes. Brush or roll from one end to the other to avoid start and stop marks.
Add extender if your climate is dry as your paint may create texture during application. Extender allows for a longer working time before the paint dries.
LEADING CAUSE OF BRUSH STROKES
- Too much paint on your brush
- Incorrect brush (natural bristle leaves more texture)
- Brushing back and forth in the same spot – the paint starts to dry while your doing this which will create texture and brush strokes quickly
- Climate – if its too dry, add extender to the paint for longer open working time